Comfort Coilovers for Tesla Model 3 RWD

(5 customer reviews)

Original price was: $1,780.00.Current price is: $1,550.00.

On Sale! Don’t Miss Out!!

Look great, ride great.

We’re extremely excited to bring you our jointly developed MPP / KW Tesla Model 3 Comfort Coilovers. After speaking with a large number of Model 3 owners in the community, we realized that there was a large demand for the ability to lower your Model 3 without reducing the ride comfort, especially over large bumps. For this reason we have developed a comfort coilover system that aims to bring you great value, smoother than OE ride, increased suspension travel and dampers done by some of the best in the business.

  • Spring rates set for comfortable driving, very similar to factory spring rates.
  • Height adjustable from factory ride height down to 50mm below stock.
  • Progressive bump rubbers tuned to engage only in the most aggressive bumps to not add to ride harshness under normal conditions.
  • Utilize the OEM upper hats for minimum NVH transmitted into the cabin. No spherical bearings to clunk and transmit road noise!
  • Bolt-in installation. A competent shop can have these coilovers installed in 3.5 hours.
  • Composite spring perch that will not seize to damper body over time as many aluminum products tend to.
  • Two-Year Warranty – Void with track use.

Fits these vehicles: Model 3 Standard RWD, Mid Range RWD, Long Range RWD

In Stock


Our Comfort Coilovers for Tesla Model 3 RWD have been developed to offer a huge range of height adjustability with significantly more travel than stock.

Developed jointly with KW Suspension, one of the leading aftermarket performance and racing suspension suppliers in the world. There is a reason why KW is the go-to pick for those that own European sports and luxury cars.

An aftermarket suspension can make or break the enjoyment of a vehicle. Unfortunately for Model 3 owners, the car is very high from the factory. It runs into the bump stops over just about any bump. They are always engaged once a car has been lowered on springs. This means that you must change the dampers (also called shock absorbers) when lowering the car to allow for a compliant chassis over bumps. This is also necessary to avoid damaging the vehicle when driving aggressively. The bump rubber can only compress so much before it becomes effectively solid. Repeated extreme impacts cause damage to the top mounts and put unnecessary shock through the entire vehicle. It can also upset the platform when driving at the limit.

White Tesla Model 3 Lowered on Coilovers Mountain Overpass

Details – Comfort Coilovers for Tesla Model 3

Our Tesla Coilovers were designed for the user that wants a similar ride to factory, even slightly softer, while having the ability to fine-tune the ride height to his or her exact preference. These coilovers offer what we feel is the perfect ride for a sports sedan. It removes a lot of the harshness caused by the firm Tesla damper, while offering a small bump in spring rate to keep the platform flat and responsive. With tons of travel, you can clobber potholes and large ruts in the road without even feeling it. In fact, the faster you go the smoother it gets!

Our suspension system utilizes the factory rear spring mounting location – as designed by Tesla. While it would be possible to put spring on the rear damper, the upper parcel shelf was never designed to carry the entire vehicle load. The chassis rigidity simply isn’t there, not to mention the NVH concerns.

As our comfort dampers are designed for lower ride height when compared to stock, the suspension will ride just as well whether it is 20mm below stock, or 50mm below stock!


Factory Ground Clearance (19″ Wheels, Early Production Springs): 

Front: 155mm
Rear: 150mm

*As Model 3 production evolves we have seen different cars be slightly different heights. You can measure the ground clearance of your car if you’re trying to determine exactly how much you can lower your car with our coilovers, but as a guide you could get the car far lower than you should ever run it. In our testing we found 110mm front and rear is a very driveable height. That is our recommended ride height.

MPP Coilover Range: 

Front: 90mm – 140mm
Rear: 100mm – 140mm

Comfort Coilovers for Tesla Model 3 RWD with Suspension Arms

MPP Suspension arms pictured with our MPP Sports Coilovers

Reviews – Comfort Coilovers RWD for Tesla Model 3

Hundreds of our customers are using our Tesla Coilover kits on their Model 3’s. So far the reviews are really encouraging! We suggest you do some research online to read some reviews and ask us if you have any questions. Our opinions of ourselves are obviously biased in our favor! Picking a suspension for your vehicle is so difficult because unlike power figures, the “feel” of the car is not something that can be quantified. For this reason, it’s not uncommon for a good salesman to get you into something you might otherwise not have chosen if you compared both products on merit entirely. The closest we can get is to suggest reading reviews, especially from those who switched to MPP from another suspension. These customers are our best source of feedback, as they have a direct back to back comparison.

This suspension kit comes with:

  • A 2-year warranty (void with track-use, as is KW policy)
  • Complete documentation including instructions
  • Recommended initial setup settings (height and damper settings)

Installation is very straightforward. The OEM top-hats are retained and as such a spring compressor is required to disassemble the factory front dampers. Nothing on the car needs to be permanently modified or damaged for installation.

If you’re interested in also purchasing our suspension arms as a package with the coilovers, please message us for a discount code!


Selecting The Suspension Kit That Is Best For You:

As we now have a number of suspension options – we’ve created a graph to help visualize the pros and cons of the different kits. If you don’t plan on ever tracking, the comfort or comfort adjustable kit is likely the best option. For those who care more about a sporty drive and will hit the track but aren’t taking it too seriously, the sports kit is exactly what you’re after. If you are getting serious about track duty, the sport kit with super sport springs will help. If you’re building a racecar with your Model 3, then the competition kit is the only suitable option.

Chart Cost Comfort Value Track Use Adjustability Adjustable Sport Super Competition

Installation Instructions HERE


Comfort Coilover Gallery

5 reviews for Comfort Coilovers for Tesla Model 3 RWD

  1. kenwu

    Great quality and hugh improvement on handling and eliminated body roll.

  2. Arjay De Guzman

    Great handling and ride quality is better than stock. The product is well engineered. I like the idea that I can adjust the height. Fast shipping, you really get what you pay for, it’s worth every penny.

  3. Eric Wai

    Truly the best of both worlds. Comfort and Performance. Race Car and Daily Driver.

    – Handling of my car has vastly improved
    – Body roll now non existent
    – No sacrifice to comfort and daily drivability at all

    If you are looking to improve the already very capable Model 3 platform, look no further than MPP!

  4. 3lectric.oomph

    Don’t settle for anything less if you are looking for long-term performance, improved OE ride quality, and handling. Yes, there are other options, but it wasn’t hard to convince myself to go with MPP after countless hours of research. The quality is unmatched and speaks for itself.

    Get that perfect stance you are looking for without sacrificing ride comfort. I guarantee you won’t regret it.

  5. Nghia Le

    got these comfort coilovers installed and couldn’t be happier. got the drop I wanted while improving ride quality so much. Most noticeable difference is when driving over road imperfections; the ride is smoother and more planted.

Add a review