Thanks for purchasing our MPP.R Racing Bucket Seat Mount Kit for Tesla Model 3! This kit is relatively easy to install, but does require some parts from your OE seat. NOTE: The seat kit is only compatible with seats with a bolting face width between 384mm –...
NOTE: Torque-Spec for the E18 Caliper Bolts is 94nm/69lb-ft Installation Instructions: Time Required: 1 HourTools Required: 10mm Socket, E18 Torx Socket, Torque Wrench, Common Hand ToolsDifficulty Level: 2/10 Video: Check out this great video from our friend Chris...
Thanks for purchasing our compression rod inserts for the Model 3 and Model Y! These are easy to install, but make sure you have the orientation correct!NOTE: The inserts press from the top-down. Video: Check out this Installation Video from our friend Chris!...
I have a vivid memory of how my father used to brag about the quality of a newly purchased car on the drive home from the dealership – “It drives straight as an arrow!” he would exclaim. Yes, that was his first test of any new vehicle. If it drove...
Hello again everyone! The other day we needed to swap out our MPP Page Mill Track Pads Track Pads for our MPP Page Mill Street Pads on The Future, so we took a few pictures to show everyone how simple it is – welcome to our Tesla Model 3 Front Brake Pad...
