Thanks for purchasing our MPP.R Racing Bucket Seat Mount Kit for Tesla Model 3! This kit is relatively easy to install, but does require some parts from your OE seat. NOTE: The seat kit is only compatible with seats with a bolting face width between 384mm –...
NOTE: Torque-Spec for the E18 Caliper Bolts is 94nm/69lb-ft Installation Instructions: Time Required: 1 HourTools Required: 10mm Socket, E18 Torx Socket, Torque Wrench, Common Hand ToolsDifficulty Level: 2/10 Video: Check out this great video from our friend Chris...
Thanks for purchasing our compression rod inserts for the Model 3 and Model Y! These are easy to install, but make sure you have the orientation correct!NOTE: The inserts press from the top-down. Video: Check out this Installation Video from our friend Chris!...
Hi Everyone! It’s nice to find time to drop you all a message again. It’s been about two months since our last update, and it seems like things at MPP are always getting busier! More and more happens in just a short period of time. Not such a bad thing!...
Here are the instructions on installing our Mountain Pass Performance Corkscrew Front Upper Control Arms. These arms are extremely simple to install, but there are a few details that require careful attention as they can save you a lot of time and effort. Please read...
